Rated Power :42W
II. Use Instructions
1. Control and manual
Plug in the power, touch the power supply starter purifier body, adjustable speed, touch the key air quality, air quality lights at this time, the rapid detection of air quality of the current space, depending on the air quality, air indicator color represents the current air quality.
2. Automatic mode
After starting product, built-in air quality sensor automatically detects the indoor air quality, after activating the automatic mode, the product will be based on measured air quality, to select the most suitable wind speed.
Note: In the automatic mode will automatically open air aura.
3. When the indoor temperature is too high, the air mass sensor may form condensation, this time even if the air quality is very good, the air quality indicator lights may also indicate the air quality is poor.
In this case, the automatic mode will cause the product fan speed operation, for solving this problem, simply wash the air mass sensor, often for environmental reasons if the formation of condensation, it is recommended that you use one of the manual wind speed settings.
4.Manually adjust the wind speed
Press the key to continuous wind speed, you need to select the wind speed, low high-grade.
Note: poor indoor air quality, the need for additional super airflow selective enhancement of wind velocity.
4. When the indoor temperature is too high, the air mass sensor may form condensation, this time even if the air quality is very good, the air quality indicator lights may also indicate poor quality.
In this case, the automatic mode will cause the product fan speed operation. To solve this problem, simply clean the air mass sensor, often for environmental reasons if the formation of condensation, it is recommended that you use one of the manual wind speed settings.
1 when the normal use of cleaner in a dry and ventilated the wind, 15-30 square meters room, start every day 2-4 hours.
2 Use an air purifier can effectively prevent respiratory diseases, such as medical otherwise, it should be carried out under the guidance of a doctor.
3. When the air cleaner electricity use, should avoid direct contact, because of the high voltage to prevent electric shock when a breathing treatment, should be more than 0.3 meters from the outlet.
Note: When the night turned purifier, Tips you switch to the timing function.
III. Product Features
Replace the set time 3980 hours, usually six months to replace the reminder, cleaner display lights buzzer alarm, automatic sound Ding Dingding per ring for three minutes, indicating the filter to be replaced.
When in standby (not pull the plug, not on standby status, long press button for 5 seconds anion hear the sound bite, indicating the success of disarmament, no longer voice sounded)
Air sensor function:
In Intelligent mode, the sensor to feel around smoke, dust, cleaner automatically open, then the wind speed based on air quality, wind speed automatic gear selection, after purification is complete, the cleaner will automatically be in standby mode and switch to smart .
This paragraph air purifier, you can control all functions within eight meters, increasing the user-friendly design, improve work efficiency.
This product also increases the PM2.5 display, automatic detection value of PM2.5 air power, also showed values in the work environment, it will change according to the value of PM2.5 purification conditions, to achieve the best results, especially in a closed environment effect is more prominent, allowing users to experience more intuitive and user-friendly design perfection.
In order to prevent children not touch other keys, causing the product does not work, especially set the child lock button! Child lock button long press 3 seconds to lock the function keys effective, To turn, according to the child lock three seconds to re-opened. All function keys restore.
Usually set the time 1000 hours or 2 months to clean up a reminder; Ah1 displays the corresponding icon lights up, the buzzer will alarm, every minute there twice ding warning tone, indicating that the filter needs cleaning
Contact: Gang Chen
Tel: 0755-33185299 Ext 8006
Add: No.11 1st Road, Xiaoshan Industrial Park, Hongtian Village, Shajing Town, Bao’an District, Shenzhen 518125,China.